elite banner

Castor Corrected Radius Arms for Early Range Rover Classic Models (Pre 1986. Narrow 38mm Type. Upto Vin BA)

Brand: Adrenalin4x4
Product Code: ADRCCRA01N
Availability: In Stock

Price: £249.95

Available Options

* Castor Correction:
* Radius Arm Colour:
- +

Adrenalin 4x4 Heavy Duty Castor Corrected Radius Arms

When a coil sprung Land Rover is lifted the caster angle of the front axle is changed. The effect this can have is vagueness and the lack of self-centring of the steering. For trucks with suspension lifts we recommend fitting caster corrected radius arms to return the steering to the correct geometry. We have a range of sizes and degrees of correction available. We have 2 sizes available, early narrow type (38mm) to fit DEF up to approximately 1992 or RRC up to approximately 1986 or later wider type (44mm), to fit all DISCO1’s, DEF from approximately 1992 onwards and RRC models from approximately 1986 onwards, each available in 3 different castor options, standard, 3 degree for 2/3 inch lift or 6 degree castor corrected for 4/5 inch lift.

These radius arms were born from the design brief given to us by the Mudsport winch challenge team. A radius arm was required that would survive the toughest competition environments without breakage or deformation. After looking at countless broken/failed conventional I section designs we decided to go back to the drawing board and design something totally new and bombproof!

Our arms have now undergone over 4 years testing in the top winch challenge events, pay and plays and fast road use and we have had very positive results and feedback with no breakages to date!

  • CAD designed and castor corrected to suit up to 5 inch lift.
  • Super heavy duty construction using 20mm plate and 40mm solid bar.
  • 10mm shorter than standard arms to overcome the front shocks colliding with the front dislocation cones under articulation.
  • Incorporated “cranked design” to relief pressure on the chassis bushes when under articulation.
  • Zinc coated to prevent corrosion.
  • Can be used with standard or polyurethane bushes.
  • Arms are notched on the insides to prevent contact with outrigger on Defender models
  • Please be aware before fitting that these radius arms are sided left and right (notch to inside).
  • All our radius arms feature the strong later type 20mm pin at the chassis end, if your truck has the early 16mm arms you will need to fit the later 20mm bushes instead.
  • Both OEM bushes and polybushes can be fitted.
There are no reviews for this product.
Write a review
Facebook comment

Shop Categories

Shipping Rates

Fast & Free UK Mainland Delivery on all orders over £215 & no Minimum Order Quantity. Standard Delivery £6.50.

UK Highlands & Islands £11 Flat Rate. Shipping to Europe £10 Flat Rate. Shipping to UAE £31 Flat Rate.

For all other oversea's buyers please email for a postage quote.