We're delighted to announce the launch of the new and updated ST and T ranges. We've expanded our range of ECE approved road-legal ST products with 6 and 12 LED variants, while the T range of market leading off-road LED spotlights has been bolstered by the introduction of a range-topping 28 LED light bar. All lamps benefit from upgraded LEDs and component technologies, combined with advanced electrical design and material solutions, to deliver superior performance and reliability, for which the Lazer brand has become synonymous.
Known as the ST Evolution and T Evolution, the new and updated lamps are recognisable for their more contemporary design, including a seamless transition from lens to heatsink, and an all-round lower profile. The width of the lamps, relative to the products they supercede, are the same, but the height of the lamps is reduced 8mm and the depth by 14mm. These reductions are meant to facilitate vehicle integration where previously restrictions on the available space may have prohibited fitting of the Lazer products. The reduced size of the lamps hasn't hindered performance however. Upgraded LEDs coupled with advanced electrical design, mean the ST / T Evolution have a higher lumen output than before. The extra light is harnessed through a modified reflector system to deliver a 'Drive' beam pattern with several key advantages over the 'Hybrid Optic' lamps they replace. These performance enhancements are highlighted below:
In improving the electronic design to bolster the lighting performance we have also made improvements to the reliability and robustness of each product, with the ultimate aim of reducing our already very low warranty rate, even further. Across the ST range, we have maintained the class-leading low E-mark reference numbers which bely the products ultimate performance.
Other than the lamps now having a central cable exit point on the reverse of each lamp, we have maintained consistency in the electrical wiring of the lamps, with the ST and T Evolution utilising the same connectors as previous. The mounting systems too, are the same as previous, with the ST lights coming supplied with either one or two glass-filled nylon polymer Centre Mounts (1114K), the T-range includes these mounts plus a Side Bracket Kit (1118K) and now also come with a wiring harness (8216-12V-SW). The exception is the ST2 which is supplied with a 3mm folded aluminium U-shaped bracket.
The new and updated lamp design replaces the previous ST and T range products. With limited stock of the old products left, unless specifically requested and agreed, all orders will now be fulfilled with the latest products. Please consider that while we have stock in place for the launch, demand is expected to be high, and at least initially, leads times for getting orders of the new lights sent out, might be slightly longer as a result.
Key Features
- High density 11W LEDs (premium ‘bin’)
- Seamless, low profile design facilitates installation
- Dynamic drive modulation optimises light output to preserve longevity of the LEDs
- Ultra-reflective optics deliver ‘Drive’ beam pattern
- CAE optimised heatsink
- E-coat pre-treatment provides maximum corrosion resistance
- ST Evolution range fully ECE approved for road use
- 5 Year Warranty
- ‘Unbreakable’ polycarbonate lens with lifetime guarantee
- IP69K rating
- Comes as standard with 30cm cable, including pre-wired male & female connectors.
- Made in Britain